News

喷淋除臭系统的性能介绍

Release Time:

2022-06-09 12:31


LK28材料喷雾降尘系统

1、系统概述和配置

材料喷雾降尘系统由水雾炮、输送管、输送泵、自动控制系统组成。水雾炮安装在垃圾装卸区上空,调节适当的流量,雾化喷嘴喷出水滴,通过风扇的风力将小颗粒均匀喷洒到垃圾罐上空,在小水滴表面形成较大的表面能和表面积,容易吸附空气中的灰尘颗粒,因此具有降尘作用。

2、系统功能特性。

(1)控制系统可以根据实际情况自由调整执行时间和执行间隔。

(2)雾喷洒液可以选择自来水或除臭剂,降尘效果好,运营成本低。

(3)整个设备占地面积小,安装运行方便。

(4)电气控制:装卸区喷雾除尘系统电气控制采用西门子可编程控制器。全系统控制,通过PLC控制,根据操作状态垃圾装卸座位数设置为多道,每个垃圾装卸座位独立使用。该系统可设置定时开关装置和粉尘除臭剂。可以根据快速快门开门信号启动除尘剂,装卸车卸货时快速快门打开,信号输出,通过喷雾除尘系统PLC控制打开喷雾。卸货车完成卸货后,将关闭快速快门,输出信号,通过喷雾除尘系统PLC延迟控制减少或关闭喷雾。

(5)控制控制:系统控制通过信号线与中间控制相连,控制室的操作计算机使用组态软件系统控制,通过控制计算机打开材料粉尘(除臭)系统,通过各路的操作控制,可以轻松操作和运行。

2.喷淋除臭系统

1.喷淋除臭系统概述和配置

喷淋除臭系统由控制系统、输液供应系统、雾化系统、相关管道、附件等组成。通过喷淋除臭系统自动稀释除臭剂的比例,然后通过高压泵配制的药剂通过特殊雾化专用喷嘴喷向空中和地面,与空间的恶臭分子充分接触,充分反应,分解恶臭分子,从根部清除地面的恶臭,达到标本和治疗的除臭目的。

2.系统脱臭机制

植物液要从多种天然植物中浸泡汁液,经过专业配方和工艺,化学、物理性质稳定,产品无毒、无害、无刺激。植物液与恶臭分子的反应:植物液通过专用高压喷雾设备通过专用喷嘴喷射成雾状,空间扩散液半径在10-20微米之间,具有表面积和较大的表面能,平均每摩尔约几十千卡,这种能量是许多元素中Kinerner的1/3 ~ 1/2。水滴的表面不仅能有效地吸收空气中的恶臭污染物,还能改变吸附的恶臭污染物的立体结构,削弱恶臭污染物的化合结合,使恶臭污染物易于分解。恶臭分子通过酸碱酯化、催化氧化等分解为无毒分子、水、无机盐等,消除恶臭,反应的产物不形成二次污染植物液和恶臭污染物主要参与以下反应。

1)酸碱反应:植物液中含有的生 物碱可以与硫化氢、氨、有机氨、视神经氨等恶臭分子反应。与普通酸碱反应不同,普通碱有毒,不能吃,不能生物降解。植物液生物降解无毒。

2)催化氧化反应:一般来说,硫化氢不能与空气中的氧气氧化,但在植物液中所含有效成分的催化作用下,硫化氢可以与空气中的氧气反应。


Latest News

2019-03-11

Spray cooling Gas station spray cooling Cooling system

When summer comes, we can use air conditioners to cool down indoors, but there is no way to turn on air conditioners like indoors. For example, in places like gas stations, where there is constant traffic, the heat generated is very large, and the mood will be irritable when it is hot. How to solve the problem of dry and hot gas stations? Quchen's high-pressure spray cooling system comes in handy. The spray cooling system is a device specially developed for outdoor use. -10μm micro-mist, wide diffusion area, fine and uniform mist particles spread out, the water mist absorbs the heat in the air and evaporates to cool down. Because the mist particles are fine, small and uniform, even if it falls on the clothes There will be no noticeable dampness. Quchen spray cooling system has low energy consumption, no pollution, low carbon and environmental protection. When the temperature in summer is above 30 degrees, the spray cooling system can play a role in cooling in a short period of time. Fresh, easy to breathe, happy mood, good for physical and mental health. Another advantage of this spray cooling system is that it can prevent static electricity. We all know that the weather is dry and friction is easy to generate static electricity. This spray cooling system moistens the surrounding environment and reduces static friction while cooling. Our company's Quchen brand spray cooling system is not only used for outdoor use in gas stations, but also can be used for cooling in outdoor public places in any venue, such as: bus stops, railway station waiting rooms, tourist attractions, commercial pedestrian streets, etc. Quchen spray cooling system will give you a cool summer.

2019-08-09

Jiangsu Suzhou high pressure spray

Jiangsu Changzhou Quchen brand automatic high pressure spray humidification system integrates multiple subsystems, including input power detection and protection system, constant pressure water supply system, water cutoff protection system, water filtration system, automatic time control system, motor protection system, and automatic drainage system. The system uses international high-end, sophisticated and cutting-edge technology equipment to professionally treat the water source. It is pressurized by a high-pressure host, and through the ultra-fine mist nozzle, the water forms mist particles of about 10 μm, which can create the effect of cloud and mist surging and gauze brushing. . Jiangsu Changzhou Quchen brand high pressure spray system advantages: Fine mist: The mist droplets produced by the spray nozzle per second are like clouds and mists in the mountains, which quickly evaporate in the air to form water vapor, which has an excellent humidification and cooling effect. Energy saving: Atomization of 1 liter of water only consumes 6W of power, which is 1% of the traditional electric humidifier and 1/10 of the centrifugal or gas-water hybrid humidifier. Reliable: The main machine of the artificial fog system adopts imported industrial plunger pump, which can run continuously for 24 hours for a long time. The spray nozzle and water mist distributor have no power and wearing parts, and they will not be damaged in high dust environment. Hygiene: The water in the artificial fog system is sealed and non-recyclable, which will not cause the reproduction of bacteria. Humidification capacity: The humidification capacity is large and can be freely combined. The spray nozzles can be configured arbitrarily within the flow range, and the humidification accuracy can be adjusted in any combination. Low energy consumption: The energy consumed by the spray system is generally 3% of the energy consumed by electric humidification and 1% of the energy consumed by steam humidification. Quchen brand high-pressure spray cooling equipment is a good choice for you, choose Quchen, believe in Quchen, if you have any needs, come and call for consultation.

2019-08-23

Warm congratulations to our company for winning the second prize in the 2nd Changzhou "Three Creation" Competition

A new era of entrepreneurship, Jiangong Star City. On the afternoon of August 22, 2019, the finals of the 2nd Changzhou Employee "Innovation, Entrepreneurship and Creativity" Competition was held in the Craftsman Hall of Changzhou Trade Union Cadre School. Xu Weinan, vice chairman of the CPPCC, chairman of the Municipal Federation of Trade Unions and party secretary, attended the meeting. Zhang Xiaojun, vice chairman of the Municipal Federation of Trade Unions, delivered a speech. Cao Zhengming, a management consulting service expert for SMEs from the Ministry of Industry and Information Technology, and Torch Entrepreneurship mentor of the Ministry of Science and Technology, the vice chairman of the Municipal Federation of Trade Unions (concurrently), a national labor model, and Chinese quality craftsman Qiao Sen participated.

2019-09-06

Spray equipment in Nantong, Jiangsu

Changzhou Quchen has a wide range of projects in Nantong, Jiangsu Province. A company in Nantong has a demand for high-voltage micro-mist equipment. Quchen has completed it very well. He is also very happy to cooperate with customers, and the results are also satisfactory to the person in charge of the company. Introduce to you the working principle of Quchen brand high-pressure spray equipment: The plunger pump pressurizes the purified water to 7MPa, and then transmits it to the nozzle through a high-pressure water pipe. After atomization, it is sprayed into the whole space with a 3-5μm micro-mist. The water mist absorbs heat in the air and changes from liquid to liquid. The gaseous state increases the humidity of the space and achieves the purpose of lowering the air temperature; if it is dust removal, for the same reason, the water mist means that the dust particles are adsorbed and wrapped to achieve a certain weight reduction and achieve the purpose of dust removal; if it is deodorization , is to mix the liquid medicine with water in proportion and spray it into the space, absorb the odor factor, and achieve the purpose of deodorization, etc. There are many project cases. This is how the micro-mist system works. Qu Chen hopes to cooperate with customers for a long time. Customer satisfaction is our achievement. If you are interested, please call us for consultation.

2019-09-12

High pressure spray dust suppression system, spray dust suppression device

What is a high pressure spray dust suppression system? The high-pressure spray dust suppression system is a high-efficiency and energy-saving dust suppression equipment, a new type of dust suppression and dust suppression technology. Its working medium is water, and the spray dust suppression device does not require compressed air. The power is 0.75-5.5kw. The principle of high-pressure spray dust suppression is to use a high-pressure pump to pressurize the water to 50-70 kg, and send it to the high-pressure nozzle through the high-pressure pipeline for atomization to form a flying water mist. Since the water mist particles are micron It can absorb impurities in the air, create good and fresh air, and achieve multiple functions such as dust reduction and humidification. The particles generated by the spray are so small that the surface tension is basically zero, and when sprayed into the air, they can quickly absorb dust particles of various sizes in the air to form effective dust control. It has a good effect on dust control and dust reduction in large and open areas. At the same time, this effect is completely a kind of atomization effect, and never produces water droplets and moisture. Dust is solid particles that can float in the air. Dust is mainly generated in the production process of raw material cutting and processing. Because the dust generated in the processing process is large, if the corresponding high-pressure dust removal measures are not matched, the dust will diffuse in the workshop and factory area, which is harmful to the human body. health and the surrounding environment. Due to the special properties of dust, the size of particle size and other factors, it is very harmful to the human body. Its chemical properties participate in and interfere with the degree and speed of biochemical processes in the body to varying degrees, such as: highly toxic metal dust (complex, lead, manganese, cadmium, etc.) enters the human body and causes poisoning and even death. Spray dust suppression device nozzle

2019-10-25

Advantages of spray cooling equipment

The fog is fine and does not wet the body: the high-pressure micro-mist spray nozzle can generate 5 billion droplets per second, and the diameter of the droplets is only 3~10um, just like the clouds in the mountains. good. Because the water droplets are extremely small, they are quickly evaporated in the air, so the water mist does not wet clothes and equipment. Energy saving and low cost: Atomization of 1 kg of water only consumes 6W of electricity, which is 1% of the traditional electric humidifier and 1/10 of the centrifugal or gas-water hybrid humidifier. Continuous operation is more reliable: the micro-mist host can run continuously for 24 hours for a long time, and the nozzle and water mist distributor have no power and vulnerable parts, and are not damaged in high dust environments. Automatically controllable on-demand spray: the spray volume is large and the spray volume and spray time can be set as needed. The output flow of the high-pressure micro-mist humidification system pump station is from 100kg/h to 1600kg/h. The mist head can be configured arbitrarily within the flow range, and the humidification accuracy can be adjusted in any combination. After setting the parameters, automatic management can be realized, and water mist is sprayed every time interval. Sealed, bacteriostatic, safe and hygienic: the water in the high-pressure micro-mist humidification system is sealed and non-circulating, which will not cause the reproduction of bacteria. Features Fully automatic control The machine is controlled by computer, and the spray time and size are automatically adjusted by computer. Ensure that the system is provisioned as needed. To achieve the expected spray effect, and more efficient and energy-saving. control fog size The spray volume is large and the spray volume and spray time can be set as needed. The output flow of the high-pressure micro-mist humidification system pump station is from 100kg/h to 1600kg/h. The mist head can be configured arbitrarily within the flow range, and the humidification accuracy can be adjusted in any combination. After setting the parameters, automatic management can be realized, and the fog can be sprayed every time interval, which can achieve the expected effect and save energy. Control fog density distribution On the basis of adjusting the size of the entire spray system, according to the needs, the adjustment of each nozzle is turned on according to the time period, fully automatic control, convenient, efficient and energy-saving. Control fog flow According to the distribution and injection angle of each nozzle, the size is controlled to achieve flow direction control. The fog is fine and not wet A nano-scale dry mist device can be used, and the high-pressure micro-mist spray nozzle can generate 5 billion droplets per second, and the diameter of the droplets is only 3~10um. The sprayed mist does not wet the body.